Difference between revisions of "Writing an IMG File to Flash media"

From PC-BSD Wiki
Jump to: navigation, search
Line 10: Line 10:
 
  81920+0 records out
 
  81920+0 records out
 
  419430400 bytes transferred in 194.226042 secs (2159496 bytes/sec)
 
  419430400 bytes transferred in 194.226042 secs (2159496 bytes/sec)
 +
 +
Note that a full image will take much longer to transfer:
 +
 +
'''dd if=PCBSD8.2-RC2-x86-USB.img of=/dev/da1 bs=5k'''
 +
778240+0 records in
 +
778240+0 records out
 +
3984588800 bytes transferred in 2106.545470 secs (1891528 bytes/sec)
  
 
When using the '''dd''' command:
 
When using the '''dd''' command:

Revision as of 09:16, 22 January 2011

Return to Table of Contents
Previous: Burning the DVD on a Mac OSX system
Next: PC-BSD Live Mode



If you selected to download a "Boot only USB for network & internet installs" .img file, you can write the image file to a flash card or removable USB drive using the built-in dd command line utility on a BSD or Linux command system. On a FreeBSD system, the superuser can use this command to write the specified image in the current directory to the first plugged in USB device:

dd if=PCBSD8.1-x86-USB-bootonly.img of=/dev/da0 bs=5k
81920+0 records in
81920+0 records out
419430400 bytes transferred in 194.226042 secs (2159496 bytes/sec)

Note that a full image will take much longer to transfer:

dd if=PCBSD8.2-RC2-x86-USB.img of=/dev/da1 bs=5k
778240+0 records in
778240+0 records out
3984588800 bytes transferred in 2106.545470 secs (1891528 bytes/sec)

When using the dd command:

  • if= refers to the input file; in our case, the name of the file to be written
  • of= refers to the output file; in our case, the device name of the flash card or removable USB drive. You may have to increment the number in the name if it is not the first USB device. On Linux, use "/dev/sda" to refer to the first USB device.
  • bs= refers to the block size

To burn the .img file on a Windows system, you can use ImgBurn--simply select the .img file as the source and the USB drive as the destination.

Once the burn is complete, you can boot from the removable device and proceed with the installation. You will also need to refer to the section on Installing PC-BSD Over a Network as the boot-only image installation requires an Internet connection to download the rest of the files needed to complete the installation of PC-BSD.

Note: if the system does not boot from the removable device, check the boot order in your system BIOS.