Difference between revisions of "Writing an IMG File to Flash media"

From PC-BSD Wiki
Jump to: navigation, search
m
Line 13: Line 13:
  
 
ADD SECTION ON how-to to flash a USB pen drive with the installer image. On Unix system this can be done with dd(1) and on Windows there's the [http://m0n0.ch/wall/physdiskwrite.php physdiskwrite] gui utility written by the M0n0wall crew.
 
ADD SECTION ON how-to to flash a USB pen drive with the installer image. On Unix system this can be done with dd(1) and on Windows there's the [http://m0n0.ch/wall/physdiskwrite.php physdiskwrite] gui utility written by the M0n0wall crew.
 +
 +
NOTE: If you get a '''dd: invalid number `1m'''' error message, then use the same command but replace '''bs=1m''' with '''bs=1M'''

Revision as of 16:22, 1 October 2010

Return to Table of Contents
Previous: Burning the DVD on a Mac OSX system
Next: PC-BSD Live Mode



To write the USB IMG file to a Flash Card or USB pen drive you can do this with the Unix/Linux command dd:

dd if=<path_to/img_file.img> of=/dev/da0 bs=1m

Just substitute da0 with the device name of your USB stick.

NOTE: The USB images are FreeBSD-UFS formatted, and will not show up as a viewable file-system under Windows.

ADD SECTION ON how-to to flash a USB pen drive with the installer image. On Unix system this can be done with dd(1) and on Windows there's the physdiskwrite gui utility written by the M0n0wall crew.

NOTE: If you get a dd: invalid number `1m' error message, then use the same command but replace bs=1m with bs=1M

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox