Difference between revisions of "Using growisofs/dvd+rw-tools in FreeBSD"

From PC-BSD Wiki
Jump to: navigation, search
Line 8: Line 8:
 
  # Place the blank DVD into the drive  
 
  # Place the blank DVD into the drive  
 
  # Install the port if it is missing: '''pkg_add -r dvd+rw-tools'''
 
  # Install the port if it is missing: '''pkg_add -r dvd+rw-tools'''
  # Issue the burn command, replacing the cd number and ISO name to reflect yours: '''growisofs -Z /dev/cd0=PCBSD8.1-x86-DVD.iso'''
+
  # Issue the burn command, replacing the cd number and ISO name if yours is different: '''growisofs -Z /dev/cd0=PCBSD8.1-x86-DVD.iso'''
 
  # Eject the DVD once the burn is finished
 
  # Eject the DVD once the burn is finished
  
 
You may need to have the ATAPI_CAM kernel option in your kernel to successfully do this if you are burning to a DVD drive that's connected via the ATAPI interface.
 
You may need to have the ATAPI_CAM kernel option in your kernel to successfully do this if you are burning to a DVD drive that's connected via the ATAPI interface.

Revision as of 09:14, 18 October 2010

Return to Table of Contents
Previous: Using Brasero in GNOME
Next: Burning the DVD on a Mac OSX system



If you are familiar with using the command line on a FreeBSD system, you can use dvd+rw-tools to burn the DVD using the following steps:

# Place the blank DVD into the drive 
# Install the port if it is missing: pkg_add -r dvd+rw-tools
# Issue the burn command, replacing the cd number and ISO name if yours is different: growisofs -Z /dev/cd0=PCBSD8.1-x86-DVD.iso
# Eject the DVD once the burn is finished

You may need to have the ATAPI_CAM kernel option in your kernel to successfully do this if you are burning to a DVD drive that's connected via the ATAPI interface.

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox