Difference between revisions of "Talk:Installation Troubleshooting"

Revision as of 11:15, 3 January 2013 (view source) Vater (Talk | contribs) m (→‎the background) ← Older edit	Latest revision as of 02:43, 12 January 2013 (view source) Tigersharke (Talk | contribs) (→‎other refs)
(One intermediate revision by one user not shown)

---

Latest revision as of 02:43, 12 January 2013

Not sure exactly how/where to place this, but it ought to be added in some form.

Contents 1 Error 19 1.1 the background 1.2 the solution 1.2.1 other refs

[edit] Error 19

[edit] the background

(from a FreeBSD forum post)

In any event, booting to FreeBSD from Grub now leads to

Code:

Mounting from ufs:/dev/ad4s3a failed with error 19

and thereafter to a mountroot prompt. Typing '?' at the mountroot prompt provides no GEOM managed disk devices whatsoever.

At this stage, I created a re-install CD of FreeBSD 9.0-RELEASE and booted from it. However, the boot ended with

Code:

Mounting from cd9660:/dev/iso9660/FREEBSD_INSTALL failed with error 19

and then the mountroot prompt. Once again, typing a '?' at the prompt showed no GEOM managed disk devices.

[edit] the solution

(from a blog post)

Here's where I found it and all that is need is to open the loader prompt during the CD/DVD/USB boot (by pressing 2 or ESC) and adding the following line:

   set debug.acpi.disabled ="hostres"

and then booting with

   boot

Once the USB key has booted you can add the line

   debug.acpi.disabled ="hostres"

to /boot/loader.conf, if you intend to use the key again. In any event, once you have installed FreeBSD 9.0-RELEASE, you still need to add this line to /boot/loader.conf.

[edit] other refs

Also documented in Open issues of FreeBSD v9.0R errata.