Sorry for the inconvenience.  Known Navigation header breakage, its being "rebuilt" but forward nav should be ok now.
There may be other unforeseen breakage primarily in the handbook portion of the wiki.
The Table Of Contents section of each "PC-BSD® Users Handbook" page may be the best workaround.

Scanner/9.2

From PC-BSD Wiki
Revision as of 11:09, 23 August 2012 by Drulavigne (Talk | contribs)

Jump to: navigation, search

(Sorry for the inconvenience)

Beginning with PC-BSD® 9.1, Control Panel provides an icon for accessing XSane, a graphical utility for managing scanners.

To use your scanner, make sure the device is plugged into the PC-BSD® system and click the Scanner icon in Control Panel or type xsane from the command line. A pop-up message will indicate that XSane is detecting devices and will prompt you to accept the XSane license if a device is detected. If a device is not detected, search for your device at the list of supported scanners.

NOTE: if the scanner is part of an HP All-in-One device, make sure that HPLIP is first installed in Control Panel -> System Manager -> System Packages -> Hardware-Drivers.

Figure 8.13a shows the XSane interface running on a PC-BSD® system attached to an HP OfficeJet.

Figure 8.13a: XSane Interface

Xsane.png


References


Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox