Difference between revisions of "Power Management"

From PC-BSD Wiki
Jump to: navigation, search
Line 4: Line 4:
  
  
 +
 +
'''Figure 7.4a:'''
 +
 +
[[File:Power1.png]]
 +
 +
'''Figure 7.4b:'''
 +
 +
[[File:Power2.png]]
 +
 +
'''Figure 7.4c:'''
 +
 +
[[File:Power3.png]]
 +
 +
'''Figure 7.4d:'''
 +
 +
[[File:Power4.png]]
 +
 +
'''Figure 7.4e:'''
 +
 +
[[File:Power5.png]]
  
 
man 4 acpi
 
man 4 acpi

Revision as of 10:05, 9 November 2010

Return to Table of Contents
Previous: Printer Troubleshooting
Next: Session Manager



Figure 7.4a:

Power1.png

Figure 7.4b:

Power2.png

Figure 7.4c:

Power3.png

Figure 7.4d:

Power4.png

Figure 7.4e:

Power5.png

man 4 acpi

hw.acpi.acline AC line state (1 means online, 0 means on battery power).

hw.acpi.lid_switch_state Suspend state (S1-S5) to enter when the lid switch (i.e., a note- book screen) is closed. Default is ``NONE (do nothing).

    hw.acpi.power_button_state

Suspend state (S1-S5) to enter when the power button is pressed. Default is S5 (power-off nicely).

hw.acpi.s4bios Indicate whether the system supports S4BIOS. This means that the BIOS can handle all the functions of suspending the system to disk. Otherwise, the OS is responsible for suspending to disk (S4OS). Most current systems do not support S4BIOS.

hw.acpi.sleep_button_state Suspend state (S1-S5) to enter when the sleep button is pressed. This is usually a special function button on the keyboard. Default is S3 (suspend-to-RAM).

    hw.acpi.sleep_delay

Wait this number of seconds between preparing the system to sus- pend and actually entering the suspend state. Default is 1 sec- ond.

    hw.acpi.supported_sleep_state

Suspend states (S1-S5) supported by the BIOS.

S1 Quick suspend to RAM. The CPU enters a lower power state, but most peripherals are left running.

S2 Lower power state than S1, but with the same basic char- acteristics. Not supported by many systems.

S3 Suspend to RAM. Most devices are powered off, and the system stops running except for memory refresh.

S4 Suspend to disk. All devices are powered off, and the system stops running. When resuming, the system starts as if from a cold power on. Not yet supported by FreeBSD unless S4BIOS is available.

S5 System shuts down cleanly and powers off.

/boot/loader.conf:

hw.acpi.reset_video Enables calling the VESA reset BIOS vector on the resume path. This can fix some graphics cards that have problems such as LCD white-out after resume. Default is 0 (disabled).

man 4 powerd

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox