Partitioning the Hard Drive/9.2
PC-BSD does not come with a built-in partition manager as the installer assumes that the drive is already prepared for an installation. If you are not planning to install PC-BSD onto the entire hard drive, you will need to use a third-party application in order to prepare a primary partition to install PC-BSD into.
NOTE: PC-BSD will not install into a secondary or logical partition, it must be a primary partition.
Before creating or editing your hard drive's partitions, make sure that you first back up your valuable data to an external media such as a removable USB drive!
Shrinking a Drive in Windows 7
If you are currently running Windows 7, it is using the entire hard drive. This means that you will need to first shrink the drive in order to make room to create a new partition.
To shrink the drive, go to Start menu, right-click Computer and select Manage. Under Storage click Disk Management. Figure 2.5a shows an example of a system running Windows 7. In this example, Windows has created three partitions: a 16GB recovery partition, a 100MB system partition, and a 450GB data partition.
Figure 2.5a: Viewing Disk Layout in Disk Management
NOTE: if you plan to dual-boot with Windows, it is important that you do not choose to install PC-BSD into any of these three partitions when you get to the Disk Selection Screen. It is a good idea to write down the sizes of the partitions so that you will recognize them when the PC-BSD installer displays your current partitions.
Since the three Windows partitions are using the entire disk, the data partition needs to be shrunk in order to create space to install PC-BSD into. To shrink the data partition, right-click the partition, in this example it is called Acer (C:), and select Shrink Volume. Wait a moment as it queries the volume for available shrink space; the results will be displayed as seen in the example in Figure 2.5b.
Figure 2.5b: Available Shrink Space
In this example,
Using PartedMagic to Create a Primary Partition
Wait for it to boot into the graphical screen, then select the Partition Editor desktop icon.