Difference between revisions of "PC-BSD® Live Mode/9.2"

From PC-BSD Wiki
Jump to: navigation, search
 
(27 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<noinclude>{{NavHeader|back=Burning the Installation Media|forward=Using VirtualBox|custompagename=PC-BSD{{r}} Live Mode|custompagecategory={{PAGENAME}}}}</noinclude>
+
<noinclude><translate>
  
Beginning with PC-BSD®&nbsp;9.1, Live Mode is a read-write live image that is only available for USB media. The uncompressed live image is about 4GB in size, but you will want to write it to a USB device that will provide sufficient room for the files that you wish to save and any applications that you wish to install.
+
<!--T:1-->
 +
{{UseTOC{{putVers}}|Nav|title=PC-BSD{{r}} Live Mode}}</noinclude>
  
'''NOTE:''' the speed of Live Mode is dependent upon the quality of the USB device. If you are purchasing a device, look for one that is advertised as "high speed".
+
<!--T:2-->
 +
Live Mode is a read-write live image that is only available for USB media. It is meant to be a portable version of PC-BSD®, similar to an operating system on a stick. The uncompressed live image requires a USB device that is ''' ''at least 8GB'' ''' in size. However, you will want to write it to a USB device that will provide sufficient room for the files that you wish to save and any applications that you wish to install.  
  
To use PC-BSD® Live Mode, download the live USB version. Once you have [[Burning the Installation Media#Writing an IMG File to USB|written the image file to a USB media]], boot the system with the USB device inserted. Assuming your BIOS has been set to boot from that device, you should see some startup messages followed by the PC-BSD® graphical boot menu, shown in Figure 2.6a.
+
<!--T:3-->
 +
{{note|width=48.5%|icon64=The PC-BSD® live image does not include an installer. This is to reduce the size of the live image for users who want to have a live portable system. If you prefer to have an installer included, you should instead {{local|link=Obtaining_PC-BSD®|anchor=Selecting_Which_File_to_Download|download the DVD or USB image}}. Also, the speed of Live Mode is dependent upon the quality of the USB device. If you are purchasing a device, look for one that is advertised as "high speed".}}
  
'''Figure 2.6a: PC-BSD® Graphical Boot Menu'''
+
<!--T:4-->
 +
To use PC-BSD® Live Mode, download the live USB version. Once you have {{local|link=Burning the Installation Media|anchor=Writing an IMG File to USB|written the image file to a USB media}}, boot the system with the USB device inserted. Assuming your BIOS has been set to boot from that device, you should see some startup messages. The first time you boot the image, the boot process will pause with this message:
  
[[File:Boot1.jpeg]]
+
<!--T:6-->
 
+
{{txtbox|pre|box=Trying to mount root from ufs:mdo []...
The options in this menu are described in [[Booting Into PC-BSD®]]. If you press enter or wait 10 seconds, the system will continue to boot. If this is the first time you have booted into the image, the boot will pause with this message:
+
tput: no terminal type specified and no TERM environmental variable.
 
+
Do you want to expand the file-system for this LIVE media?
{{txtbox|box=Trying to mount root from ufs:mdo []...<br>
+
This process may take up to 15 minutes.
tput: no terminal type specified and no TERM environmental variable.<br>
+
Do you want to expand the file-system for this LIVE media?<br>
+
This process may take up to 15 minutes.<br>
+
 
Resize? (y/n):}}
 
Resize? (y/n):}}
  
 +
<!--T:7-->
 
This step grows the filesystem so that it can use the entire capacity of the USB device. Press '''y''' to expand the filesystem and reboot into live mode:
 
This step grows the filesystem so that it can use the entire capacity of the USB device. Press '''y''' to expand the filesystem and reboot into live mode:
  
{{txtbox|box=Resizing file-system da0a on da0, this may take a few minutes...<br>
+
<!--T:8-->
Adjusting partition tables on da0...<br>
+
{{txtbox|pre|box=Resizing file-system da0a on da0, this may take a few minutes...
Running growfs on da0a, this may take a while...<br>
+
Adjusting partition tables on da0...
 +
Running growfs on da0a, this may take a while...
 
Cleaning up...<br>
 
Cleaning up...<br>
 
Rebooting...}}
 
Rebooting...}}
  
 +
<!--T:9-->
 
You will know that you have successfully entered live mode when you are asked to accept the graphics resolution mode that is considered to be optimal for your hardware.
 
You will know that you have successfully entered live mode when you are asked to accept the graphics resolution mode that is considered to be optimal for your hardware.
  
If this is your first boot, you will then proceed through the [[Post Installation Configuration and Installation Troubleshooting| post-installation configuration screens]], ending in the [[Logging In]] screen.
+
<!--T:10-->
 
+
If this is your first boot, you will then proceed through the {{local|link=Post Installation Configuration and Installation Troubleshooting| post-installation configuration screens}}, ending in the {{local|link=Logging In}} screen. When logging in, use the user account and password that you were prompted to create. Three desktops are available: {{local|link=Fluxbox}}, {{local|link=LXDE}}, and {{local|link=Openbox}}.
When logging in, use the user account and password that you were prompted to create. Three desktops are available: [[Fluxbox]], [[LXDE]], and [[Openbox]].
+
  
 +
<!--T:11-->
 
<noinclude>
 
<noinclude>
 +
[[category:PC-BSD® Live Mode]]
 +
[[category:Pre-Installation Tasks]]
 
[[category:handbook]]
 
[[category:handbook]]
[[category:Pre-Installation Tasks]]
+
</translate>
[[category:PC-BSD® Live Mode]]
+
<languages />
 
</noinclude>
 
</noinclude>

Latest revision as of 20:25, 15 December 2013



Live Mode is a read-write live image that is only available for USB media. It is meant to be a portable version of PC-BSD®, similar to an operating system on a stick. The uncompressed live image requires a USB device that is at least 8GB in size. However, you will want to write it to a USB device that will provide sufficient room for the files that you wish to save and any applications that you wish to install.

NOTE: The PC-BSD® live image does not include an installer. This is to reduce the size of the live image for users who want to have a live portable system. If you prefer to have an installer included, you should instead download the DVD or USB image. Also, the speed of Live Mode is dependent upon the quality of the USB device. If you are purchasing a device, look for one that is advertised as "high speed".

To use PC-BSD® Live Mode, download the live USB version. Once you have written the image file to a USB media, boot the system with the USB device inserted. Assuming your BIOS has been set to boot from that device, you should see some startup messages. The first time you boot the image, the boot process will pause with this message:

Trying to mount root from ufs:mdo []...

tput: no terminal type specified and no TERM environmental variable. Do you want to expand the file-system for this LIVE media? This process may take up to 15 minutes.

Resize? (y/n):

This step grows the filesystem so that it can use the entire capacity of the USB device. Press y to expand the filesystem and reboot into live mode:

Resizing file-system da0a on da0, this may take a few minutes...

Adjusting partition tables on da0... Running growfs on da0a, this may take a while... Cleaning up...

Rebooting...

You will know that you have successfully entered live mode when you are asked to accept the graphics resolution mode that is considered to be optimal for your hardware.

If this is your first boot, you will then proceed through the post-installation configuration screens, ending in the Logging In screen. When logging in, use the user account and password that you were prompted to create. Three desktops are available: Fluxbox, LXDE, and Openbox.

Other languages:German 18% • ‎English 100% • ‎French 18%