Difference between revisions of "PC-BSD® Live Mode/9.2"

From PC-BSD Wiki
Jump to: navigation, search
(37 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{NavHeader|back=Burning the Installation Media|forward=Using VirtualBox}}
+
<noinclude><translate>
If you wish to try out PC-BSD before installing it, download either the live DVD or live USB version. Once you have burned the downloaded file to the appropriate media, insert the DVD or USB device. Assuming your BIOS has been set to boot from that device, you should see some startup messages followed by the PC-BSD boot menu, shown in Figure 2.8a.
+
  
'''Figure 2.8a: PC-BSD Welcome Screen in Live Mode'''
+
<!--T:1-->
 +
{{NavHeader|back=Burning the Installation Media|forward=Using VirtualBox|custompagename=PC-BSD{{r}} Live Mode|custompagecategory={{PAGENAME}}}}</noinclude>
  
[[File:Live.jpeg]]
+
<!--T:2-->
 +
[[File:Boot1.jpeg|thumb|385px|'''Figure 2.6a: PC-BSD® Graphical Boot Menu''']]
 +
Beginning with PC-BSD®&nbsp;9.1, Live Mode is a read-write live image that is only available for USB media. The uncompressed live image is about 4GB in size, but you will want to write it to a USB device that will provide sufficient room for the files that you wish to save and any applications that you wish to install.
  
This screen provides the following options:
+
<!--T:3-->
 +
{{note|width=48.5%|icon64=the speed of Live Mode is dependent upon the quality of the USB device. If you are purchasing a device, look for one that is advertised as "high speed".}}
  
'''1. Boot [default]:''' continues to boot PC-BSD with all standard options enabled. This is the default if you don't select anything else within 10 seconds.
+
<!--T:4-->
 +
To use PC-BSD® Live Mode, download the live USB version. Once you have [[Burning the Installation Media#Writing an IMG File to USB|written the image file to a USB media]], boot the system with the USB device inserted. Assuming your BIOS has been set to boot from that device, you should see some startup messages followed by the PC-BSD® graphical boot menu, shown in Figure 2.6a.
  
'''2. Boot with ACPI enabled:''' by default ACPI is disabled in live mode. If you wish to test PC-BSD's ACPI capabilities on your computer, select this option.
+
<!--T:5-->
 +
The options in this menu are described in [[Booting Into PC-BSD®]]. If you press enter or wait 10 seconds, the system will continue to boot. If this is the first time you have booted into the image, the boot will pause with this message:
  
'''3. Boot in Safe Mode:''' if PC-BSD has problems booting on your hardware, try selecting this option.
+
<!--T:6-->
 +
{{txtbox|pre|box=Trying to mount root from ufs:mdo []...
 +
tput: no terminal type specified and no TERM environmental variable.
 +
Do you want to expand the file-system for this LIVE media?
 +
This process may take up to 15 minutes.
 +
Resize? (y/n):}}
  
'''4. Boot with verbose logging:''' select this option if you would like to see more detailed messages during the boot process. This can be useful if you wish to watch that all of your hardware is successfully detected.
+
<!--T:7-->
 +
This step grows the filesystem so that it can use the entire capacity of the USB device. Press '''y''' to expand the filesystem and reboot into live mode:
  
'''5. Boot to emergency console:''' will boot to the menu shown in Figure 2.8b. If you choose the System Utilities option, you can manually run '''fdisk''', drop to an emergency shell, or chroot into the root partition.
+
<!--T:8-->
 +
{{txtbox|pre|box=Resizing file-system da0a on da0, this may take a few minutes...
 +
Adjusting partition tables on da0...
 +
Running growfs on da0a, this may take a while...
 +
Cleaning up...<br>
 +
Rebooting...}}
  
'''6. Boot with X in VESA mode:''' select this option if you suspect that your video card is not supported by PC-BSD.
+
<!--T:9-->
 +
You will know that you have successfully entered live mode when you are asked to accept the graphics resolution mode that is considered to be optimal for your hardware.
  
'''7. Escape to loader prompt:''' advanced users can select this option to perform advanced operations such as loading or unloading kernel modules.  
+
<!--T:10-->
 +
If this is your first boot, you will then proceed through the [[Post Installation Configuration and Installation Troubleshooting| post-installation configuration screens]], ending in the [[Logging In]] screen. When logging in, use the user account and password that you were prompted to create. Three desktops are available: [[Fluxbox]], [[LXDE]], and [[Openbox]].
  
'''Figure 2.8b: Emergency Console in Live Mode'''
+
<!--T:11-->
 
+
<noinclude>
[[File:Live1.jpeg]]
+
[[category:PC-BSD® Live Mode]]
 
+
[[category:Pre-Installation Tasks]]
Unless you select to boot into the emergency console or the loader prompt, PC-BSD will continue to load. When it is finished loading, the desktop selector menu, shown in Figure 2.8c, will appear:
+
[[category:handbook]]
 
+
</translate>
'''Figure 2.8c: Desktop Selector Menu'''
+
<languages />
 
+
</noinclude>
Use your arrow keys or type the letter of the window manager you wish to boot into, then press enter.
+
 
+
[[File:Select.jpeg]]
+
 
+
Figure 2.8d shows a screenshot of PC-BSD running the KDE desktop manager from live mode.
+
 
+
'''Figure 2.8d: PC-BSD in Live Mode'''
+
 
+
[[File:Live1a.jpeg]]
+
 
+
'''NOTE:''' like any live DVD, the amount of installed memory will affect the time it takes the operating system to load and how responsive the system is once loaded. Also, live mode provides very little storage, meaning that you should not install applications or save files within this mode. Live mode is meant to provide an environment for testing hardware and to see if you like PC-BSD. If you do, you should consider installing PC-BSD either onto the computer's hard drive or into a virtual environment such as VirtualBox.
+
 
+
If you wish to install PC-BSD, simply click the icon on the desktop. It will start the installation program for you.
+
 
+
If you wish to leave live mode altogether, click the red flame in the lower left corner -> Leave. You can then select to Restart or Shut down the computer.
+

Revision as of 02:15, 23 April 2013

(Sorry for the inconvenience)

Figure 2.6a: PC-BSD® Graphical Boot Menu

Beginning with PC-BSD® 9.1, Live Mode is a read-write live image that is only available for USB media. The uncompressed live image is about 4GB in size, but you will want to write it to a USB device that will provide sufficient room for the files that you wish to save and any applications that you wish to install.

NOTE: The speed of Live Mode is dependent upon the quality of the USB device. If you are purchasing a device, look for one that is advertised as "high speed".

To use PC-BSD® Live Mode, download the live USB version. Once you have written the image file to a USB media, boot the system with the USB device inserted. Assuming your BIOS has been set to boot from that device, you should see some startup messages followed by the PC-BSD® graphical boot menu, shown in Figure 2.6a.

The options in this menu are described in Booting Into PC-BSD®. If you press enter or wait 10 seconds, the system will continue to boot. If this is the first time you have booted into the image, the boot will pause with this message:

Trying to mount root from ufs:mdo []...

tput: no terminal type specified and no TERM environmental variable. Do you want to expand the file-system for this LIVE media? This process may take up to 15 minutes.

Resize? (y/n):

This step grows the filesystem so that it can use the entire capacity of the USB device. Press y to expand the filesystem and reboot into live mode:

Resizing file-system da0a on da0, this may take a few minutes...

Adjusting partition tables on da0... Running growfs on da0a, this may take a while... Cleaning up...

Rebooting...

You will know that you have successfully entered live mode when you are asked to accept the graphics resolution mode that is considered to be optimal for your hardware.

If this is your first boot, you will then proceed through the post-installation configuration screens, ending in the Logging In screen. When logging in, use the user account and password that you were prompted to create. Three desktops are available: Fluxbox, LXDE, and Openbox.

Other languages:German 18% • ‎English 100% • ‎French 18%
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox