However, unfortunately, the Table of contents may also be broken, and there may be other unforeseen breakage primarily in the handbook portion of the wiki.
Presently the 10.1 and 10.1.1 Table Of Contents are being "reconstructed" becoming incrementally fixed while the other handbook versions may have various breakage.
Installation eines Servers
The Maske zur Auswahl des Systems of the PC-BSD® installer can be used to install TrueOS®, a FreeBSD-based server operating system, rather than a PC-BSD® desktop operating system.
TrueOS® adds the following to a vanilla installation of FreeBSD: Verwaltung der PBI, the command line version of warden, and the command line versions of most of the Kontrollzentrum utilities. You will find those utilities in /usr/local/bin/pc-*. It also installs this of additional shells and utilities.
For a server installation, using the PC-BSD® installer rather than the FreeBSD installer offers several benefits:
- the ability to easily configure ZFS during installation
- the ability to configure ZFS multiple boot environments
- a wizard (described in this section) is provided during installation to configure the server for first use.
If you wish to install any additional server software, click the "Customize" button. This screen, shown in Figure 5.2b, can be used to install packages such as MySQL, PostgreSQL, Samba, PHP, VirtualBox, Apache, and Lighttp.
After making your selections, press "Next" to start the "Server Setup Wizard". Click "Next" again to see the screen shown in Figure 5.2c.
Input and confirm the root password then click "Next" to proceed to the screen shown in Figure 5.2d.
For security reasons, you should not login as the root user. For this reason, the wizard requires you to create a primary user account that will be used to login to the FreeBSD system. This account will automatically be added to the wheel group, allowing that user to su to the root account when administrative access is required.
This screen contains the following fields:
- Name: can contain capital letters and spaces.
- Username: the name used when logging in. Can not contain spaces and is case sensitive (e.g. Kris is a different username than kris).
- Password: the password used when logging in. You must type it twice in order to confirm it.
- Default shell: use the drop-down menu to select the csh, tcsh, or sh login shell.
When finished, click "Next" to proceed to the screen shown in Figure 5.2e.
Input the system's hostname. If you will be using ssh to administer the system, check the box "Enable remote SSH login". Click "Next" to proceed to the network configuration screen shown in Figure 5.2f.
Use the "Network Interface" drop-down menu to select from the following:
- AUTO-DHCP-SLAAC: (default) will configure every active interface configured for DHCP and both IPv4 and IPv6
- AUTO-DHCP: will configure every active interface for DHCP and IPv4
- IPv6-SLAAC: will configure every active interface for DHCP and IPv6
Alternately, select the device name for the interface that you wish to manually configure and input the IPv4 and/or IPv6 addressing information. When finished, click "Next" to proceed to the screen shown in Figure 5.2g.
If you wish to install FreeBSD source or ports, check the associated box(es) then click "Finish" to exit the wizard and access the summary screen shown in Figure 5.2h.
Click "Customize" if you wish to proceed to the Maske zur Auswahl des Laufwerkes in order to configure the system's disk(s).
If you wish to save the finished configuration to re-use it at a later time, insert a FAT-formatted USB stick and click "Save Config to USB".
Once you are ready to start the installation, click "Next". A pop-up menu will ask if you would like to start the installation now.
Once the system is installed, it will boot to a command-line login prompt. Login using the primary user account that was configured during installation. You can now configure and use the server as you would any other FreeBSD server installation. Theis an excellent reference for performing common FreeBSD server tasks.