Bluetooth GUI Discussion

From PC-BSD Wiki
Revision as of 03:15, 9 July 2009 by Yerenkow (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

We have a decent network GUI. I think we should start thinking of BlueTooth GUI. There is such things which need to be used: hcsecd - control link keys and PIN codes for Bluetooth devices sdpd - Bluetooth Service Discovery Protocol daemon hccontrol - HCI configuration utility obexapp - executable, OBEX protocol.

Here is a list of requirements to GUI, in no particular order:

Gui should ...

. show (indicate) that kernel module ng_ubt is loaded . allow load (unload) ng_ubt; . show (add/remove) ng_ubt_load in /boot/loader.conf . show status (and start/stop/restart) hcsecd service; . show (add/remove) hcsecd_enable in /etc/rc.conf . have a tree with such structure: Devices--Device1(Service1, Service2...) . have an ability to scan (search for devices), show which is known devices, which is new . add device to /etc/hcsecd.conf, edit pin, name, etc; . allow to add (edit/delete) ppp records, to use device as modem . allow to connect/disconnect device to internet via rfcomm_ppp . If device (mobile phone) have ability to FTRN, this service should expand to device's FS; . Device's FS tree should support drag-n-drop, at least to other tree, which is for local FS (Ideally to any other external filemanager, like dolphin, or else)

Personal tools